E62-433T30D


  • [Interface] : UART
  • [RF] : -
  • [Frequency] : 433MHz
  • [Power dBm] : 30dBm
  • [Distance] : 3.0km
  • [Size] : 37*60mm
  • [Packing] : DIP
  • [Antenna] : SMA-K
  • [Feature] : Full Duplex
  • Product Detail

    Product Tags

    E32-TTL-100_01E62(433T30D)-933

    Brand

    Ebyte

    RF IC

    -

    Model

    E62-433T30D

    Interface

    UART

    Power

    30dBm

    Distance

    3000m

    Antenna type

    SMA-K

    Frequency

    433MHz (425~450.5MHz)

    E62-433T30D is a 1W wireless transceiver module,operating at 425-450MHz.It featues FHSS,which greatly improves the anti-interference performance, TDD,which realizes transmiting data while receiving simultanuously,and FEC algorithm, which ensures its high coding efficiency & good correction performance.

    新版E62-TTL-100_02新版E62-TTL-1W_03新版E62-TTL-1W_04

    General parameters

    Antenna type

    SMA-K

    External thread hole,50Ω characteristic impedance

    Operating temperature

    -40 ~ +85℃

    Industrial grade

    Operating humidity

    10% ~ 90%

    Relative humidity,No condensation

    Storage temperature

    -40 ~ +125℃

    Industrial grade

    Size

    37 * 60mm

    -

    Weight

    25g

    Average weight

    Connector

    1*7*2.54mm

    Plug-in

    Operation Range

    3000m

    Test condition: clear and open area & 30dBm antenna gain: 5dBi, height: 2m, air data rate: 64kbps

    Communication interface

    UART

    8N1,8E1,8O1, eight kinds of UART baud rate, from 1200 to 115200 bps (default: 9600)

    Driving mode

    UART

    Can be configured to push-pull/high pull, open-drain

    Transmitting length

    1024 bytes buffer

    To sub-pack automatically

    Receiving length

    2048 bytes buffer

    Huge buffer

    Electrical parameters

    Frequency Band

    425~450.5MHz

    Default: 433MHz; Channel: 51

    Supply voltage

    4.75~5.5V DC

    Note: The voltage higher 5.5V is forbidden

    Communication voltage

    3.3V

    -

    Transmitting power

    30dBm(1W)

    4 optional level(30、27、24、21dBm)

    Air data rate

    64kbps

    Can be configured to 16, 32, 64, 128kbps

    Standby current

    N/A

    Sleep mode is unavailable

    Transmitting current

    640mA@30dBm

    ≥1.0A

    Receiving current

    40mA

    Mode 0

    Sensitivity

    -109dBm@1.2kbps

    Sensitivity has nothing to do with baud rate or timing

    新版E31-TTL-2W_05

    Pin no.

    Pin item

    Pin direction

    Pin application

    1

    M0

    Input
    (weak pull-up)

    Decide the two operating modes.

    Floating is not allowed, can be ground.

    2

    M1 (LOCK)

    Output

    Indicating of synchronization. High-level means synchronization completed by both sides and data transmitting is available. Otherwise low-level means synchronization is uncompleted, it will lead to package lost during transmitting.

    3

    RXD

    Input

    TTL UART inputs, connects to external (MCU, PC) TXD output pin. Can be configured as open-drain or pull-up input.

    4

    TXD

    Output

    TTL UART outputs, connects to external RXD (MCU, PC) input pin. Can be configured as open-drain or push-pull output

    5

    AUX

    Output

    To indicate module’s working status & wakes up the external MCU. During the procedure of self-check initialization, the pin outputs low level. Can be configured as open-drain output or push-pull output (floating is allowed).

    6

    VCC

    Power supply 2.1V ~ 5.5V DC

    7

    GND

    Ground

    8

    GND

    Fixing hole

    9

    GND

    Fixing hole

    10

    GND

    Fixing hole

    11

    GND

    Fixing hole

    12

    GND

    Fixing hole

    13

    GND

    Fixing hole

    14

    GND

    Fixing hole

    15

    GND

    Fixing hole

    应用E32-TTL-100_07


  • Previous:
  • Next:

  • Related Products

    WhatsApp Online Chat !