E75-2G4M20S


  • [Interface] : IO
  • [RF IC] : JN5168
  • [Frequency] : 2.4GHz
  • [Power] : 20dBm
  • [Distance] : 1.0km
  • [Size] : 16*30mm
  • [Packing] : SMD
  • [Antenna] : PCB / IPX
  • [Feature] : Super small, embedded with 32ARM
  • Product Detail

    Product Tags

    E32-TTL-100_01E752G4M20S-933

    Brand

    Ebyte

    RF IC

    JN5168

    Model

    E75-2G4M20S

    Interface

    I/O

    Power

    20dBm

    Distance

    1000m

    Antenna type

    IPX/PCB

    Frequency

    2.4GHz (2.405 ~ 2.48GHz)

    E75-2G4M20S series designed by Chengdu Ebyte is a high-performance and low-consumption ZigBee wireless transceiver module, which is based on NXP JN5168. It provides a complete application integration scheme at ISM(2.4-2.5GHz) based on IEEE802.15.4. It supports protocols like FastZigBee, ZNET, JenNet-IP, ZigBee-PRO, RF4CE and etc.

    新版E75-2G4M20S_02新版E75-2G4M20S_03新版E75-2G4M20S_04

    General parameters

    Antenna type

    IPX/PCB

    50Ω characteristic impedance

    Operating temperature

    -40 ~ +85℃

    Industrial grade

    Operating humidity

    10% ~ 90%

    Relative humidity,No condensation

    Storage temperature

    -40 ~ +125℃

    Industrial grade

    Size

    16 * 30 mm

    -

    Weight

    1.2 ± 0.1g

    Average weight

    Connector

    1.27mm

    SMD

    Operation Range

    1000m

    Open area; 20dBm;Height: 2m; Air data rate: 250kbps

    Communication interface

    IO

    See details in Pin definition

    RSSI support

    -105 ~ – 20dBm

     Please see more details in <JN5168 manual>

    Electrical parameters

    Frequency Band

    2.405 ~ 2.48GHz

    2.4GHz, IEEE802.15.4 protocol

    Supply voltage

    2.0 ~ 3.6V DC

    The voltage higher than 3.6V is forbidden

    Communication voltage

    3.3V

    VCC refers to the supply voltage

    Transmitting power

    20dBm

    100mW

    Air data rate

    250kbps

    -

    Standby current

    1.2uA

    MCU in sleep, Wireless disabled, VCC=3.3V

    Transmitting current

    145mA@20dBm

    > 200mA

    Receiving current

    26mA

    3.3V

    Sensitivity

    100dBm@250Kbps

    -

     

     

    新版E75-2G4M20S_05

    Pin No.

    Pin Item

    Pin Direction

    Pin Application

    1

    ADC1

    I

    JN5168 input ADC pin(Refer to JN5186 Datasheet for more details)

    2

    SPI-CLK

    I

    JN5168 SPI communication clock pin

    3

    SPI-MISO/ISP

    I/O

    JN5168 SPI output. When ISP is used for burn via UART, it’s burn mode after pulling down and powering on.

    4

    SPI-MOSI

    I/O

    JN5168 SPI input

    5

    SPI0-SE

    I

    SPI CS pin. It’s used to start a SPI communication.

    6

    DIO0

    I/O

    It can be configured as general IO port.(Refer to JN5186 Datasheet for more details)

    7

    DIO1

    I/O

    It can be configured as general IO port.(Refer to JN5186 Datasheet for more details)

    8

    NC

    NC

    9

    NC

    NC

    10

    DIO4

    I/O

    It can be configured as general IO port.(Refer to JN5186 Datasheet for more details)

    11

    DIO5

    I/O

    It can be configured as general IO port.(Refer to JN5186 Datasheet for more details)

    12

    DIO6

    I/O

    It can be configured as general IO port.(Refer to JN5186 Datasheet for more details)

    13

    DIO7

    I/O

    It can be configured as general IO port.(Refer to JN5186 Datasheet for more details)

    14

    DIO8

    I/O

    It can be configured as general IO port.(Refer to JN5186 Datasheet for more details)

    15

    DIO9

    I/O

    It can be configured as general IO port.(Refer to JN5186 Datasheet for more details)

    16

    DIO10

    I/O

    It can be configured as general IO port.(Refer to JN5186 Datasheet for more details)

    17

    VDD

    Power positive

    Power supply 2.0V ~ 3.6V DC(3.3V and an added external ceramic filter capacitor are recommended.)

    18

    GND

    Ground

    Ground electrode. It connects to the power reference place.

    19

    DIO11

    I/O

    It can be configured as general IO port.(Refer to JN5186 Datasheet for more details)

    公司简介2


  • Previous:
  • Next:

  • Related Products

    WhatsApp Online Chat !